Interactive Quiz
Find Your Vacuum Match

Answer 4 quick questions for your home's personalized, evidence-based recommendation.

Laser beams from a robot vacuum's LiDAR navigation sensor mapping a room

Robot vacuums · Guide

Roborock's Solid-State Tech Is LiDAR, Not a Battery

Roborock's 'solid-state' upgrade is a LiDAR navigation sensor, not a battery. What the Saros 10R and Saros 20 changed, and what it means for buyers.

Editor’s Shortlist

Top Picks at a Glance

3 Recommendations
  1. Roborock's StarSight 2.0 flagship #1 Top Pick
    Roborock Saros 20 Robot Vacuum & Mop
    Roborock

    Roborock Saros 20

    $750–$1,000 8.1 /10 · Excellent

    Best for: Buyers who want Roborock's newest turret-free navigation and the lowest-profile body

    36,000 Pa 3D ToF Auto Dock
  2. Top-scoring Roborock with classic LiDAR
    Roborock Q Revo Master
    Roborock

    Roborock Q Revo Master

    $1,000–$1,500 7.9 /10 · Good

    Best for: Proven turret LiDAR mapping and a full self-washing dock at a lower price than the Saros

    10,000 Pa LiDAR Auto Dock
  3. Best-value Roborock
    Roborock Q Revo
    Roborock

    Roborock Q Revo

    $500–$750 7.7 /10 · Good

    Best for: Reliable LiDAR mapping and spinning mops without flagship pricing

    5,500 Pa LiDAR Auto Dock

Prices and specs last synced October 29, 2026.

Jump to Section (8)
  1. 01 What Did Roborock Actually Change in Its Navigation Hardware?
  2. 02 How Does Solid-State LiDAR Compare to Traditional Spinning LiDAR?
  3. 03 Does Roborock Have a Solid-State Battery?
  4. 04 What Does Solid-State LiDAR Mean If You Are Buying a Robot Vacuum Now?
  5. 05 How Do You Measure Your Furniture for a Low-Profile Robot?
  6. 06 What Doesn’t Solid-State LiDAR Change?
  7. 07 Which Roborock Navigation Setup Fits Which Home?
  8. 08 What Is the Clarification on Roborock LiDAR Terminology?

Quick answer: Roborock hasn’t announced a solid-state battery. Its “solid-state” upgrade is a navigation sensor: a LiDAR with no spinning parts, built into the robot’s body instead of a turret on top. That makes the robot lower, so it fits under more furniture. Roborock’s robots still run on lithium-ion batteries.

What Did Roborock Actually Change in Its Navigation Hardware?

Roborock replaced the spinning LiDAR tower that has topped most of its robots with a sensor built into the body.

  • Saros 10R: introduced Roborock’s StarSight navigation. Vacuum Wars describes it as “the industry’s first dual-transmitter solid-state LiDAR combined with time-of-flight sensors.” Without the tower, the robot stands 3.14 inches tall. (Vacuum Wars)
  • Saros 20: announced at CES 2026, it uses StarSight Autonomous System 2.0, which pairs 3D time-of-flight sensors with dual-transmitter solid-state LiDAR. It is positioned in the $1,500+ tier. (Vacuum Wars, Roborock)

How Does Solid-State LiDAR Compare to Traditional Spinning LiDAR?

Both sensors measure distance with laser light to map your home. The difference is how they’re built.

Spinning LiDAR Solid-state LiDAR
Where it sits Raised turret on top Built into the body
Moving parts A motor spins the sensor None
Robot height Taller Lower profile

Why it matters: a lower robot reaches under more beds, sofas and kitchen kick plates, where dust collects and older robots can’t go. Fewer moving parts also means one less component that can wear out.

Does Roborock Have a Solid-State Battery?

No. We checked Roborock’s newsroom and its CES 2026 announcements on October 6, 2026, and found no solid-state battery for robot vacuums.

Its robots use lithium-ion batteries. Roborock lists the Saros 10R at 180 minutes on low power, according to Vacuum Wars. Real runtime is shorter at higher suction or while mopping.

Solid-state batteries are still an emerging technology, with most public timelines aimed at electric vehicles. If Roborock announces one, we’ll cover it here.

What Does Solid-State LiDAR Mean If You Are Buying a Robot Vacuum Now?

  • Low furniture? A robot without a LiDAR turret is worth a look. Measure the gap under your lowest sofa or bed first.
  • Long runtime? Compare rated runtimes directly. No current Roborock robot uses a different battery chemistry.
  • Not sure what navigation you need? See our guide to the best robot vacuums with LiDAR, our best robot vacuums ranking, and our Roborock brand page.

How Do You Measure Your Furniture for a Low-Profile Robot?

Height is the reason to care about a turret-free robot, so measure before you compare models.

  1. Measure the lowest point, not the frame. A sofa skirt, a bed’s centre support rail or a cabinet kick plate sets the real gap. Measure from the floor to that point.
  2. Compare it with the robot’s listed height. Roborock lists the Saros 20 at 3.14 inches tall. RTINGS lists 3.1 inches as the lowest height cleared in its review.
  3. Leave a margin. A gap that matches the robot’s height exactly leaves no room for a rug edge or an uneven floorboard.
  4. Check the way in. A robot can only clean under a bed if it can get past the legs and anything stored beside it.

A worked example: a sofa with a 4-inch gap and a bed with a 3.5-inch gap. A 3.14-inch robot fits under both on paper. A robot with a LiDAR turret may not. The JONR X9 Pro, for instance, needs at least 4.33 inches of clearance because its turret doesn’t retract. If your lowest furniture sits 5 inches or more off the floor, turret height stops being a deciding factor.

What Doesn’t Solid-State LiDAR Change?

The sensor changes where the laser sits and how tall the robot is. It doesn’t settle how well a robot cleans, mops or steers around clutter. Those depend on the brushes, the mop, the dock and the obstacle-avoidance system.

Outside reviews of the Saros 20 show the difference:

  • RTINGS says the older Saros 10R is more consistent at avoiding obstacles and better at clearing stains, for considerably less money. It rates the Saros 20’s obstacle handling as inconsistent and notes that it tends to avoid narrow spaces such as under dining chairs.
  • RTINGS also calls the Saros 20 a good alternative to the Saros 10R if you prioritize debris pickup on carpets.
  • Vacuum Wars describes strong mopping and debris pickup, with average navigation efficiency and below-average battery.

So read a robot’s review for the jobs you need done. The navigation sensor is one line on the spec sheet.

Which Roborock Navigation Setup Fits Which Home?

Home Roborock to look at Why
Low beds and sofas, thick carpet, tall door thresholds Saros 20 Turret-free StarSight 2.0 body. Roborock rates it for carpet pile up to 1.18 inches and single thresholds up to 1.77 inches
Normal-height furniture, kitchen grease, lots of corners Q Revo Master Turret LiDAR, a FlexiArm side brush and extending mop, and a dock that washes pads with 75°C water. Rated at 10,000 Pa and 180 minutes
Tidy floors and a tighter budget Q Revo Turret LiDAR and dual spinning mops. Rated at 5,500 Pa and 180 minutes

One caution on the Q Revo: Vacuum Wars calls it a strong mid-range pick and names obstacle avoidance as its main weakness, with a result of 4 of 12 on its obstacle course. Pick up cables before it runs.

All three run on lithium-ion batteries. For a wider brand comparison, see Roomba vs. Roborock.

What Is the Clarification on Roborock LiDAR Terminology?

BestVacuumCleaner.co published this article to replace an earlier version that described an unverified Roborock solid-state battery announcement, including a 400-minute runtime and an early-2027 launch. We couldn’t verify that announcement in Roborock’s newsroom or in news coverage, so we removed it. We regret the error.

Frequently Asked Questions

Does Roborock have a solid-state battery robot vacuum?

No. As of October 6, 2026, Roborock has not announced a solid-state battery for its robot vacuums in its newsroom or in its CES 2026 announcements. Its 'solid-state' technology is a LiDAR navigation sensor. Its robots run on lithium-ion batteries.

What is solid-state LiDAR on a robot vacuum?

It's a laser distance sensor with no spinning parts, built into the robot's body. Traditional LiDAR spins inside a raised turret on top of the robot. Removing the turret makes the robot lower, so it can fit under more furniture.

Which Roborock models use solid-state LiDAR?

The Saros 10R introduced Roborock's StarSight system, which combines dual-transmitter solid-state LiDAR with time-of-flight sensors. The Saros 20, announced at CES 2026, uses StarSight Autonomous System 2.0.

How long does a Roborock Saros battery last?

Roborock lists the Saros 10R's runtime at 180 minutes on low power, according to Vacuum Wars. Runtime drops at higher suction and when mopping.

Researched & Written By

Adam Green

Content Manager at BestVacuumCleaner.co. Adam compiles manufacturer specifications, cited independent test results and owner feedback into one comparison, with every figure labelled by source.

Operations: Lori Adam (Digital Operations · LinkedIn)

If you buy through a link on this page, we may earn an affiliate commission at no extra cost to you. How we’re funded →

Ready to buy?

Our pick: Roborock Saros 20 Robot Vacuum & Mop

8.1/10 Consensus Score

As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Check the current price on Amazon.